ZiFiSense 工业物联 · 预测性维护解决方案 ZiFiSense IIoT · Predictive Maintenance

设备不再突然坏掉
让每条告警都可行动
Equipment No Longer Breaks Down
Make Every Alert Actionable

传感器 × ZETA网络 × Agentic AI
从"被动救火"到"主动预防"的完整端到端方案
Sensors × ZETA Network × Agentic AI
End-to-End Solution from "Passive Firefighting" to "Active Prevention"

⚡ 安装即学习 · 一周可用 · 新手也能做专家级运维 Plug & Learn · Ready in 1 Week · Expert O&M for Beginners
真实场景Real Scenario

王工的每一天 Engineer Wang's Daily Life

某工厂运维工程师,负责全厂 50+ 台关键设备。
他面对的问题,几乎每家工厂的运维人员都有。
An O&M Engineer responsible for 50+ critical assets.
His challenges are shared by O&M teams worldwide.

📱

早上 8:00 打开手机8:00 AM: Checking the Phone

15条告警在等他。哪条是真的?哪条是误报?每条都要判断,光这一件事就能耗掉一上午。 15 pending alerts. Which are real? Which are false? Verifying each one manually drains half his day.

🚗

上次跑了一趟现场Last Site Visit

什么问题都没发现——是误报。这次又来告警,还去不去?去了浪费时间,不去万一真坏了呢? Found no issues—it was a false alarm. Now another alert pops up. To go or not to go? Go and waste time, or ignore and risk a real breakdown?

⚙️

知道 3 号泵有问题Knowing Pump #3 is Failing

但停机影响今天的生产计划。要修还是不修?能撑多久?没人说得清楚。 But shutting it down disrupts today's production plan. Repair it now or wait? How long can it last? Nobody knows for sure.

08:03 🔔 15条未处理告警🔔 15 Pending Alerts
3号泵 — 振动超限Pump #3 — High Vibration 🔴
7号风机 — 温度偏高Fan #7 — Temp Warning 🟡
12号压缩机 — 异常Compressor #12 — Fault 🔴
5号电机 — 振动微升Motor #5 — Minor Vib. 🔵
2号泵 — 温度告警Pump #2 — Temp Warning 🟡
8号风机 — 频谱异常Fan #8 — Spectrum Anomaly 🔴
...还有 9 条...and 9 more
每条都要我自己判断,从哪里开始?I have to judge every single one. Where do I start?
传统运维的真实代价The True Cost of Traditional O&M

每一次非计划停机,代价远比你想象的大 The Cost of Unplanned Downtime is Far Beyond Imagination

0
万元x 10k RMB
一次非计划停机的直接损失Direct loss per unplanned downtime
水泥厂真实案例 · 2天停机Cement Plant Case · 2 Days Downtime
0
%
工业设备故障属于可预防的
渐进退化,有足够响应时间
Equipment failures are preventable
gradual degradation with enough response time
数据来源:行业研究报告Source: Industry Research Reports
0
天Days
从首次告警到设备故障
AI本可在这段时间内介入
From first alert to breakdown
AI could have intervened in this window
5月8日告警 → 5月25日损坏Alert on May 8th → Failure on May 25th
关键断点:设备报了警,人去看说没事,17天后设备真的坏了。不是传感器的问题——是从"看到告警"到"做出正确决策"之间,没有AI填补这个空白。 The Missing Link: An alert triggered, a human checked and found nothing, 17 days later the equipment broke down. It wasn't the sensor's fault—it's because there is no AI to bridge the gap between "Seeing an Alert" and "Making the Right Decision".
完整端到端方案Full End-to-End Solution

像一个完整的医生,而不是独立的零件 Like a Complete Doctor, Not Isolated Parts

四层不是四个独立产品的拼凑,而是一条从头到尾协同工作的链路 The 4 layers aren't a patchwork of products, but a fully collaborative pipeline from start to finish.

👁️
第一层Layer 1
感知层Sensing Layer
AI 的"感官"The AI's "Senses"
振动传感器 (VTC)Vibration Sensor (VTC)
声学传感器Acoustic Sensor
红外热成像IR Thermal Camera
内置 Edge AIBuilt-in Edge AI
🔗
第二层Layer 2
网络层Network Layer
AI 的"神经"The AI's "Nerves"
ZETA LPWAN
强穿透覆盖Deep Penetration
独立组网Independent Network
端到端加密E2E Encryption
💾
第三层Layer 3
平台层Platform Layer
AI 的"记忆"The AI's "Memory"
设备管理Device Management
数据汇聚Data Aggregation
告警管理Alert Management
频谱分析Spectrum Analysis
🧠
第四层Layer 4
智能层Intelligence Layer
AI 的"大脑"The AI's "Brain"
Agentic AI 诊断Agentic AI Diagnosis
剩余寿命预测RUL Prediction
维护排程助手Maintenance Scheduler
对话式交互Conversational UI
🩺 医生类比🩺 The Doctor Analogy 只有大脑没有眼睛耳朵(纯云端AI)→ 只能看别人转述的病情,诊断不准;只有眼睛耳朵没有大脑(纯传感器)→ 能看数据但不会分析。 ZiFiSense:从感官到大脑一体化,数据质量和诊断质量同时可控。 Brain without senses (Cloud-only AI) → Relies on hearsay, inaccurate diagnosis; Senses without a brain (Sensors only) → Collects data but cannot analyze. ZiFiSense: Integrated from Senses to Brain, guaranteeing both data quality and diagnostic accuracy.
硬件产品Hardware Products

传感器不只是数据采集器,它会"思考" Sensors Aren't Just Data Collectors, They "Think"

ZAIoT-VTD01
Edge AI
ZAIoT-VTD01

振动与温度传感器Vibration & Temperature Sensor

安装在旋转设备上,同步采集振动和温度数据。内置 Edge AI,设备端自主完成特征提取和异常检测——不是"有什么传什么",而是"AI需要什么就提供什么"。 Installed on rotating equipment to synchronously collect vibration and temperature data. Built-in Edge AI completes autonomous feature extraction and anomaly detection—providing "what the AI needs" instead of "whatever is raw".

监测对象Targets
泵、电机、风机、压缩机Pumps, Motors, Fans, Compressors
核心能力Core Ability
振动 + 温度双通道Dual Vib & Temp Channel
特征提取Features
20+ 振动特征(RMS、峭度等)20+ Features (RMS, Kurtosis, etc.)
自适应采样Adaptive
正常低频 · 异常自动提频Low freq normal · High freq on anomaly
⚡ 设备端自主学习 · 1周建立基线 · 无需人工设阈值On-device Self-learning · 1-Week Baseline · No Manual Thresholds
XS-SW-30A
声纹分析Acoustic Analysis
XS-SW-30A 声纹分析引擎Voiceprint Analysis Engine

声学传感器Acoustic Sensor

用于难以安装接触式传感器的设备。通过分析设备运行时的声音特征,识别异常模式。8通道同步采样,捕捉细微声学变化,发现早期异常。 For equipment where contact sensors are hard to install. Identifies abnormal patterns by analyzing operational sound signatures. 8-channel synchronous sampling captures subtle changes to spot early anomalies.

监测原理Principle
声纹特征分析Voiceprint Analysis
亮点能力Highlight
8 通道同步采样8-Channel Sync Sampling
适用场景Scenarios
难以接触的设备表面Hard-to-reach surfaces
安装方式Installation
非接触式 · 灵活部署Non-contact · Flexible setup
🎵 声纹建模 · 异常声音实时识别 · 多通道同步捕捉Voiceprint Modeling · Real-time Anomaly Recognition
IR Camera
热成像Thermal Imaging
工业红外热成像摄像头Industrial IR Thermal Camera

红外热成像IR Thermal Camera

非接触式大面积温度监测,适合电气柜、管道分布、大型设备表面的热异常检测。发现肉眼看不到的温度异常,与振动数据联合诊断更准确。 Non-contact large-area temperature monitoring. Ideal for detecting thermal anomalies in electrical cabinets, pipelines, and large machinery. Uncovers invisible temperature problems for better joint-diagnosis with vibration data.

监测范围Scope
大面积 · 非接触Large Area · Non-contact
典型场景Scenarios
电气柜、配电盘、管道Cabinets, Panels, Pipes
输出形式Output
热图像 + 温度矩阵Thermal Image + Matrix
异常检测Detection
热点自动识别定位Auto Hotspot Recognition
🔥 热点识别 · 温度趋势跟踪 · 与振动数据联合诊断Hotspot Recognition · Temp Trend Tracking · Joint Vib Diagnosis
网络层Network Layer

ZETA网络
为工厂而生
ZETA Network
Built for Factories

工厂不是办公室——金属密集、电磁干扰、覆盖范围广。
数据传不回来,AI再聪明也没用。
Factories aren't offices—they are metal-dense, electromagnetic, and vast.
If data can't return, even the smartest AI is useless.

🏭

独立组网,不依赖企业ITIndependent Network, IT-Free

不占用现有网络资源,安装人员自行搞定,无需IT部门审批配合Zero existing resource usage; installers handle it themselves without IT department red tape.

📡

强穿透,工厂哪里都能用Deep Penetration, Works Anywhere

金属设备密集、地下室、管廊——ZETA信号都能稳定到达Metal-dense zones, basements, utility tunnels—ZETA signals arrive reliably.

🔌

灵活扩展,今天10台明天50台Flexible Scaling, 10 to 50 Easily

加几个中继节点就能扩容,不需要重新布网,保护已有投资Scale up by adding a few relay motes without rewiring, protecting your investment.

🔒

端到端加密,工业数据安全E2E Encryption, Industrial Security

满足企业安全合规要求,设备数据全程加密不外泄Meets enterprise compliance needs; device data is fully encrypted end-to-end.

ZETA 网关 ZETA Gateway ↑ 云端平台 ↑ Cloud Platform 振动传感器 Vib. Sensor 3号泵 Pump 3 振动传感器 Vib. Sensor 7号风机 Fan 7 ⚠ 声学传感器 ⚠ Acoustic 压缩机 Compressor 振动传感器 Vib. Sensor 5号电机 Motor 5 红外热成像 IR Camera 配电柜 Cabinet Mote 中继节点 Relay Mote 远端设备 Remote Dev. 通过中继覆盖 Via Relay Mote 正常设备 Normal 待关注 Warning 中继节点 Relay Mote
日本凸版工厂 100m × 180m · 实测覆盖对比 Toppan Factory Japan 100m × 180m · Real-Test Coverage ←————————————— 180m —————————————→ 100m Plant Plant SS SS SS SS SS SS Plant Plant SS SS Plant Plant Gateway ZETA Mote 中继节点 Relay Mote ZETA (无 Mote) (No Mote) ZETA (有 Mote) (With Mote) EnOcean LoRa ZETA(无Mote) ZETA (No Mote) ZETA(有Mote,全厂覆盖) ZETA (With Mote, Full Coverage)
核心理念Core Concept
Agentic AI 不是报更多的警
而是让每条告警都变得可行动
Agentic AI is not about reporting more alerts,
it's about making every alert actionable.
😰 以前的体验😰 Past Experience
  • ❌100条告警 · 每条都要人判断100 alerts · Manual verification for each
  • ❌每次告警都要跑现场验证Site visit required for every alert
  • ❌发现问题就得被迫紧急停机Forced emergency stop upon failure
  • ❌经验在老师傅脑子里带不走Experience is locked in experts' heads
→
😊 AI增强后😊 AI-Enhanced
  • ✅AI筛选5条 · 3条自动跟踪AI filters to 5 · Tracks 3 automatically
  • ✅AI告诉你去现场该看什么AI guides on what to inspect on-site
  • ✅提前25天知道 · 计划窗口维修25-day early warning · Planned repair
  • ✅知识库+案例匹配 · 新手也能判断KB + Case matching · Novice can diagnose
每条告警到达用户时,都携带三样东西:Every alert delivered carries 3 things:
①根因判断(为什么报警)· ②现场验证指南(去了该看什么)· ③处置建议(确认后怎么做) ① Root cause diagnosis (Why it triggered) · ② On-site verification guide (What to look for) · ③ Actionable suggestions (What to do next)
四大场景解法4 Scenario Solutions

每个运维痛点,AI都有针对性的解法 For every O&M pain point, AI provides targeted solutions

以前Before 告警海:每天淹死在里面Sea of Alerts: Drowning Every Day
📱 100条告警涌入,根本看不过来100 alerts pour in, impossible to read
😰 每条都不敢忽视,又没时间逐一判断Dare not ignore any, but no time to verify
🔕 最后:把通知关掉,所有告警都不看了Result: Muted notifications entirely
💥 结果:真正的问题也被淹没,直到设备真坏Consequence: Real issues drown until breakdown
AI增强AI-Enhanced 智能降噪:只看值得看的Smart Noise Reduction: Only Watch What Matters
🤖
工况自适应阈值Adaptive Thresholds:启停、满载/半载用不同标准,不误报Different standards for spin-up, full/half load.
🔇
去抖动过滤Debounce Filter:2分钟内自动恢复的瞬态波动,不推给你Transient spikes recovering within 2 mins are hidden.
🔗
级联合并Cascaded Merge:A、B同时报 → 找根因C设备,3条变1条Merge causal chains into single root-cause alerts.
📊
排优先级Prioritization:今天最应该先处理这3台,其余AI帮你跟踪Highlighting top 3 criticals today, tracking the rest.
以前Before 跑了一趟,什么都没发现Went but found nothing
🚗 收到告警,派人去现场Go on-site upon receiving alert
🔍 到了看看摸摸,没发现明显异常Look and touch, but no glaring faults visually
🤷 汇报:没问题,可能是误报Report: Probably a false alarm
💥 17天后设备真坏了——早期故障肉眼看不出来Breaks 17 days later—early faults are invisible.
AI增强AI-Enhanced 现场验证指南:去了知道看什么Verification Guide: Know What To Look For
📋
AI提供现场检查清单:AI Provides Inspection Checklist:
□ 测驱动端轴承温度,对比非驱动端,温差>8°C确认异常
□ 听驱动端有无周期性冲击声
□ 检查润滑状况
□ Measure drive-end bearing temp -> Delta >8°C is anomaly.
□ Listen for cyclic impacts.
□ Check lubrication.
🎯
AI说明当前阶段Stage Clarification:早期故障肉眼可能无法发现,建议3天后复测对比Invisible initial fault stage, re-check in 3 days.
✅ 用户提交检查结果,AI更新诊断评估并学习反馈Submit results, AI updates diagnosis and logs feedback.
以前Before 告警来了就得派人跑Must dispatch personnel on every alert
😤 每条告警都觉得必须派人现场处理Assuming every alert requires on-site attention
👥 人手有限,根本跑不过来Understaffed, impossible to keep up
🔥 要么疲于奔命,要么索性全部忽略Exthausted or simply ignoring everything
AI增强AI-Enhanced 五级分类响应:大多数不用去5-Level Response: Mostly Remote
🔵
关注Monitor:AI跟踪3天,不用动AI tracks for 3 days, no action needed.
🟣
远程确认Remote Verify:看一下平台数据,不用跑现场Check platform data, no site visit.
🟡
计划检查Planned Check:下次巡检时顺便看一下Verify during next routine patrol.
🟠
尽快检查Expedited:需要专门安排人去Assign personnel specifically for this.
🔴
紧急Emergency:立即处理Handle immediately.

前三级占大多数告警——大部分时候不需要跑现场 First 3 levels cover majority of alerts—saving most on-site visits.

以前Before 发现问题 = 被迫紧急停机Issue Found = Forced Shutdown
⚠️ 发现设备有问题,不知道还能撑多久Found an issue, but don't know how long it can last
😱 为了不影响生产,选择拖着不修Delay repair to not impact production schedule
💥 设备突然坏掉,紧急停产,损失更大Sudden breakdown, emergency shutdown, massive loss
AI增强AI-Enhanced 预测剩余寿命:什么时候修最划算RUL Prediction: Repair at Minimal Loss
📅
AI建议示例:AI Suggestion Example:
"3号泵轴承预计剩余寿命 25±5天,仍可安全运行。建议4月13日例行停机时一并更换,同时处理7号风机润滑。" "Pump #3 bearing Expected RUL: 25±5 days. Still safe to run. Recommend replacing during the April 13th scheduled shutdown, alongside Fan #7 lubrication."
📈
退化速率持续监控Degradation Rate Monitor:退化加速会及时更新预测和告警等级Acceleration triggers immediate rating updates.
📋
维护窗口匹配Maintenance Sync:AI找到最近的停机计划,建议最优时机AI aligns tasks with planned optimal shutdown windows.
五大核心功能5 Core Features

从"给你数据"到"告诉你该干什么" From "Showing Data" to "Telling You What To Do"

每日任务看板Daily Task Board
早上好,张工 👋Good morning, Mr. Zhang 👋
2026-04-03
在线 48/50Online 48/50 健康 42Healthy 42 关注 5Monitor 5 需处理 1To Act 1
🔴 需要你处理🔴 Requires Your Action
3号泵 — 驱动端轴承早期磨损Pump 3 — Drive-end Bearing Early Wear
AI置信度 82% · 剩余寿命约25天 · 建议下次停机时更换AI Confidence 82% · RUL ~ 25 days · Recommend replacing at next stop
查看诊断View Diagnosis 安排维护Schedule Maint. 暂不处理Ignore for Now
🟡 AI在跟踪,暂不需要你介入🟡 AI is Tracking, No Action Needed
7号风机 — 振动略有上升,AI持续监测中Fan 7 — Slight vibration increase. AI monitoring.
下次评估:3天后Next evaluation: in 3 days
12号压缩机 — 上周告警已降级,趋势平稳Compressor 12 — Warning downgraded, trend stable.
✅ 已完成✅ Completed
5号电机 — 上周动平衡校正后振动恢复正常Motor 5 — Vibration normal after last week's balancing.

每日任务看板Daily Task Board

替代传统告警列表。打开系统第一眼,就知道今天该干什么。 Replaces the traditional alert list. Know exactly what to do at first glance.

✦三区分类3-Zone Triage:需要你处理 / AI帮你盯着 / 已经搞定Require Act / AI Tracking / Completed
✦每条自带建议Actionable Tips:AI已经判断好了,你只需确认AI diagnosed, just need your confirmation.
✦一键行动1-Click Actions:查看诊断 · 安排维护 · 暂不处理View Diagnosis · Schedule Maint. · Ignore
✦闭环追踪Closed-Loop:所有处理结果都回到看板,实时更新All results update in the board in real-time.
3号泵 · AI诊断报告Pump 3 · Diagnosis Report
🔍 AI判断AI Diagnosis
疑似:驱动端轴承外圈早期磨损Suspected: Drive-end Bearing Outer Race Early Wear
置信度:82% · 紧急程度:中 · 预计还能安全运行 20-30天 Confidence: 82% · Urgency: Medium · Safe RUL ~ 20-30 days
判断依据Evidence
· BPFO轴承缺陷特征频率幅值上升40%
· 驱动端温度较非驱动端高6°C
· 历史案例匹配:3例类似模式 [查看案例]
· BPFO defect frequency amplitude +40%
· Drive-end temp 6°C higher than non-drive
· Historic Case Match: 3 similar patterns [View Cases]
现场验证指南Site Verification Guide
☐ 测驱动端轴承温度,与非驱动端温差>8°C确认
☐ 听驱动端有无周期性"嗒嗒"冲击声
☐ 检查润滑状况
☐ Measure drive-end bearing temp -> Delta >8°C.
☐ Listen for cyclic "click" impact sounds.
☐ Check lubrication.
处置建议Action Advice
推荐:下次计划停机时更换 · 备件:6208-2RS · 预估工时:2小时 Recommend: Replace at next stop · Part: 6208-2RS · Time: 2hrs
安排维护Schedule Maint. AI继续跟踪AI Track 标记误报Mark False-Alarm

AI诊断卡片AI Diagnosis Card

不是原始频谱图,而是AI分析好的结论。数据作为支撑证据放在后面。 Not raw vibration spectrums, but synthesized AI conclusions. Details serve as backing evidence.

✦结论前置Conclusion First:先告诉你是什么问题,再展示证据Tell you the issue first, show evidences later.
✦现场验证指南Site Guide:去了现场知道具体检查什么(解决误判问题)Know exactly what to check on-site (resolves false alarms).
✦历史案例匹配Case Match:同类型故障处置经验可直接参考Direct reference to similar historic cases.
✦三条行动路径Action Paths:安排修 · 让AI跟踪 · 反馈误报Schedule Fix · Let AI Track · Mark False.
维护排程助手 · 3号泵轴承更换Maintenance Sync · Pump 3
AI建议的维护窗口AI Recommended Window
4月7日4/79日4/911日4/1113日4/1315日4/1517日4/17
🟢 安全窗口Safe🟡 有风险Risky🔴 危险Danger
📌 推荐:4月13日(日)例行停机日Rec: April 13 (Sun) Stop
最近停机窗口,设备寿命充足,建议一并处理:Nearest shutdown window, sufficient RUL. Batch tasks:
• 3号泵:更换轴承 6208-2RS(预估2小时)• Pump 3: Bearing 6208-2RS (2h)
• 7号风机:润滑补充(预估30分钟)• Fan 7: Lubrication (30m)
→ 合并处理,停机一次搞定两件事Batch tasks: one stop, two fixes
确认排程Confirm 选其他日期Other Dates

维护排程助手Maintenance Scheduler

把"要不要停机"变成"什么时候停机最划算" Turn "Should we shut down?" into "When is the most cost-effective time?"

✦安全窗口可视化Visual Safe Window:基于RUL预测,告诉你还有多少天可等待RUL tells you how many days you can wait.
✦匹配生产计划Plan Sync:自动找换产间隙、例行停机日等可利用窗口Syncs with tool changeovers, routine stops.
✦合并多台设备Batch Tasking:既然要停机,一次搞定所有待维护设备One downtime, multiple tasks cleared out.
✦持续更新预测Dynamic Updates:退化加速时主动更新推荐窗口和告警等级Adjusts windows if degradation accelerates.
💬 对话助手Chat Assistant
A车间上个月哪台设备故障最多?Which machine in Workshop A had the most faults last month?
A车间上月共记录17次告警事件。3号泵告警最频繁(6次),主要为轴承早期磨损相关。[查看详细报告] 17 alerts recorded in Workshop A last month. Pump 3 was the most frequent (6 times), mostly related to early bearing wear. [View Detail Report]
帮我出一份本周运维周报Generate this week's O&M report.
已生成本周运维周报(4月1日-7日)
· 处理告警3条 · 完成维护1次
· 预计避免停机损失:750万元
[下载PDF报告]
Weekly O&M report generated (Apr 1-7)
· Handled 3 alerts · Completed 1 maintenance task
· Avoided downtime loss: \$1.1M
[Download PDF Report]
↑

对话助手Chat Assistant

任何页面都能随时呼出。自然语言交互,不需要任何培训。 Summonable from any page. Natural language interaction, zero training required.

✦"A车间哪些设备需要关注?""Which devices in Area A need attention?" → 设备列表+状态标注Device list + Status labels
✦"对比1号和2号电机振动趋势""Compare Motor 1 vs 2 vibration" → 对比图+AI解读Comparison Chart + AI Insight
✦"帮我出本周运维周报""Generate O&M weekly report" → 结构化报告直接下载Structured report ready to download
✦"BPFO轴承缺陷频率怎么计算?""How to calculate BPFO frequency?" → 知识解答+公式Knowledge answer + Formula
3号泵 · 设备健康档案Pump 3 · Device Health Archive
2026.01.15
传感器安装,开始监测Sensors installed, monitoring started
2026.02.10
⚠ AI诊断:轴承轻微磨损(置信度65%)AI Diagnosis: Slight Bearing Wear (65%)
→ 用户选择:AI继续跟踪User Chose: Let AI Track
2026.03.15
🔴 AI诊断:磨损加剧(置信度82%)AI Diagnosis: Increased Wear (82%)
→ 用户选择:安排维护User Chose: Schedule Maint.
2026.03.22
🔧 维护完成:更换轴承 6208-2RSMaintenance Done: Bearing 6208-2RS Replaced
→ AI确认:振动恢复正常AI Confirmed: Vibration normalized
当前状态Current Status
✅ 运行正常Running Normal

设备档案与案例库Device Archive & Case Lib

告警和故障积累本身就是资产。越用越有价值,经验不再随人员流失。 Alerts and faults are accumulated assets. Retain all experience digitally.

✦设备健康档案Lifecycle Archive:完整生命线,每次诊断和维护都有记录Complete lifeline, every diagnosis and maintenance is logged.
✦AI自己用For AI Learning:下次遇到类似故障,匹配历史案例提高诊断准确率Match similar historic cases to improve future accuracy.
✦新人用For New Staff:查"同类设备以前出过什么问题、怎么处理的"Search "What issues happened before and how were they fixed."
✦管理层用For Management:整体设备健康趋势、哪类设备故障最多、维护成本分布Health trends, failure rate by type, cost distribution.
真实案例验证Real Case Validation

水泥厂案例:同一台设备,两种结局 Cement Factory Case: Same Machine, Two Outcomes

基于真实发生案例的复盘与对比 · 原始案例来源:ZiFiSense客户案例库 Based on real reconstructed cases · Source: ZiFiSense Client Case Library

没有AINo AI被动应对Passive Response

Day 1 · 5月8日· May 8
传感器报了轴承故障告警Sensor triggers bearing fault alert
平台显示振动超限,原因不明Platform shows high vibration, reason unknown
Day 10 · 5月18日· May 18
派人去现场看了看Dispatched personnel on-site
检查了一圈,觉得没问题,判断为误报Looked around, found nothing, concluded false alarm
Day 17 · 5月25日· May 25
💥 设备突然损坏Sudden breakdown
轴承损毁,紧急停产2天,损失 750万元 Bearing destroyed, 2 days emergency stop, loss \$1.1M

有AIWith AI主动预防Proactive Prevention

Day 1
传感器安装,Edge AI 开始学习Sensor installed, Edge AI starts learning
7天建立设备基线,Agentic AI 同步建立画像 7 days to build baseline, Agentic AI builds profile
Day 10
🤖 AI自动诊断:轴承早期磨损(82%)Auto-Diag: Early Bearing Wear (82%)
推送:根因分析 + 现场验证指南 + 剩余寿命25天
用户选择:AI继续跟踪
Push: Root Cause + Reg. Guide + RUL 25 Days
User chosen: Let AI Track
Day 13
⚡ AI更新:退化加速,升级为中高风险AI Update: Wear accelerated, raised to High-Risk
用户点"安排维护" → AI推荐4天后的例行停机日 Clicked "Schedule" → AI suggests routine stop in 4 days
Day 17
✅ 计划维护完成,更换轴承Planned maintenance done, bearing replaced
确认轴承确实早期磨损 · 避免紧急停产 · 750万损失没有发生 Confirmed actual wear · Avoided emergency shutdown · Saved \$1.1M
主动 vs 被动Proactive vs Passive
AI第10天诊断,人工第18天才看(且判断错了)AI diagnosed on Day 10, manual check on Day 18 (and was wrong)
准确 vs 误判Accurate vs False
人工判断"没问题",AI正确识别早期磨损Human judged "ok", AI correctly spotted early wear
计划 vs 紧急Planned vs Emergency
计划维护 vs 紧急停产2天,750万损失没有发生Planned maint. vs 2 days shutdown, saved \$1.1M loss
多行业验证Multi-Industry Proven

已在多个行业验证落地 Proven Deployment Across Multiple Industries

🔍 查看案例View Case
🏭
水泥制造Cement Mfg
关键旋转设备24/7监测,提前识别轴承退化24/7 crucial rotating eq monitoring, early wear ident.
3个月内避免2次停机 · 节省750万+Avoided 2 stops in 3 mos · Saved \$1.1M+
🍽️
食品饮料F&B
HVAC系统全面监测,能效优化与故障预警HVAC full monitoring, energy sync & fault warning.
能耗降低15% · 故障提前2-3周预警Energy -15% · Pre-warning 2-3 weeks ahead
🔍 查看案例View Case
⚗️
化工Chemicals
替代人工巡检,多设备同时监测Replaced manual patrol, multi-device monitoring.
避免多次非计划停机 · 人效大幅提升Avoided multi un-planned stops · Massive efficiency boost
🔍 查看案例View Case
⚡
热电厂Power Plant
关键电气设备与旋转机械全覆盖监测Crucial electrical & rotational full coverage.
提前发现隐患 · 降低安全事故风险Early hazard detection · Reduced safety risks
量化价值Quantified Value
0
%
人员门槛
降低
Req Skill
Reduced
0
%
有效告警
减少
Alert Noise
Reduced
0
%+
处理效率
提升
Handling
Efficiency
0
%
停机损失
进一步降低
Downtime
Loss Savings

* 基于现有客户案例数据和行业基准估算 * Estimated based on existing client data and industry benchmarks

为什么值得投?Why Invest?

投资回报:一台设备避免一次停机,就回本了 ROI: Prevent one downtime event, and it pays for itself

📊 典型工厂成本结构Typical Factory Cost Structure
💥 单次非计划停机损失Single Unplanned Downtime Loss 300万–1,000万元\$450k – \$1.5M
👷 年度运维人工成本(10人团队)Annual O&M Labor (10 headcount) 150万–300万元\$200k – \$450k
🔧 紧急维修额外费用(备件溢价+加急工时)Emergency Repair Extra Costs 计划维修的3–5倍3–5x of planned maintenance
📉 生产损失(停机1天,产能×利润率)Production Loss (1 day stop) 视产线而定Varies by line
💡 ROI 简算逻辑ROI Calculation Logic
年化ROIAnnual ROI = (避免的停机损失 + 人效节约)(Avoided Downtime Loss + Labor Savings) ÷ (方案年费用)(Annual System Cost)
通常:避免 1次 非计划停机 = 回收 1–3年 方案费用Usually: Eliminating 1 unplanned stop = Covers 1-3 years of system cost
🎯 三类客户的典型回报Typical Payback by Profile
🏭 重型制造(水泥/化工)Heavy Mfg (Cement/Chem) 高风险高价值High Risk Value
单次停机损失 500万+,方案投入通常低于单次损失的 10%Single stop loss >\$750k. System cost is often <10% of one stop
预期回报周期:3–6个月Expected Payback: 3–6 months
🍽️ 食品饮料(HVAC/产线)F&B (HVAC/Lines) 能效+可用率Energy + Uptime
能耗降低15% + 故障减少,双重节约Energy -15% + fewer failures, dual savings
预期回报周期:6–12个月Expected Payback: 6–12 months
⚡ 关键基础设施(热电/水务)Infrastructure (Power/Water) 安全+合规Safety + Compliance
停机影响社会供给,风险不可量化Downtime affects social supply, unquantifiable risk
价值:安全合规 + 声誉保护Value: Compliance & Reputation protection
✅ 水泥厂真实案例:方案投入约为单次避免损失的 <15%Cement Case: Cost was <15% of the single avoided downtime loss
核心差异化Core Differentiation

为什么是ZiFiSense? Why ZiFiSense?

🎯
数据质量可控Controllable Data Quality
别人做不到的What others can't do
自研传感器 + 自研Edge AI,数据质量从源头就是ZiFiSense掌控的。竞品AI平台再好,数据来自别家传感器,质量不可控,诊断结果就不可控。In-house sensors + Edge AI. We control data quality from the source. Competitors rely on 3rd-party sensors, leading to uncontrollable AI results.
✅ ZiFiSense: 从传感器到AI全链路自控End-to-end controlled
❌ 纯AI平台:依赖客户自己解决数据采集Pure AI: Relies on client's data
❌ 纯传感器厂商:有数据没深度AI诊断Pure Sensor: Data but no deep AI
⚡
Day 1 可用Day 1 Ready
别人要等半年Others need half a year
传感器安装当天开始AI学习,1周后即可诊断预警。Agentic AI自然语言交互,连培训都不需要。竞品通常需要客户先积累3-6个月历史数据再训练模型。AI learns on day 1, diagnoses by week 1. Natural language interaction means zero training. Competitors need 3-6 months of data collection first.
✅ ZiFiSense: 安装→学习→诊断,1周内Install→Learn→Diag in 1 week
❌ 工业AI平台:需要3-6个月数据积累Ind. AI: 3-6 mos data req.
❌ 大厂工业云:PdM只是众多模块之一Big Tech: Just one of many modules
🧠
边缘+云端双层AIEdge+Cloud Dual AI
别人只有一层Others only got one layer
边缘侧传感器内置AI做毫秒级快速预警;云端Agentic AI做秒级深度诊断。纯传感器厂商只有边缘没深度分析,纯AI平台只有云端没实时性。Built-in Edge AI does ms-level fast warning; Cloud Agentic AI does sec-level deep diagnosis. Combined for speed & accuracy.
✅ ZiFiSense: 边缘(ms级)+ 云端(s级)Edge (ms) + Cloud (sec)
❌ 纯传感器:只有边缘,无深度诊断Sensors: Edge only, no deep diag
❌ 纯AI平台:只有云端,依赖定时上传Pure AI: Cloud only, high latency
🩺 类比:Analogy: 能看到原始CT影像的医生,和只能看别人转述检查报告的医生——谁的诊断更准确?ZiFiSense是前者。A doctor who sees the original CT scan vs one who only reads a forwarded summary—who diagnoses better? ZiFiSense is the former.
竞争对比Competitive Edge

完整端到端,是真正的护城河 Full End-to-End is the Real Moat

能力维度Dimension ✨ ZiFiSense 纯传感器厂商Pure Sensors
SKF, IFM, etc.
工业AI平台Ind. AI Platforms
Jiyun, etc.
大厂工业云Big Tech Clouds
Aliyun IoT, etc.
自研工业传感器In-house Sensors ✓ 振动+声学+红外Vib+Acoustic+IR ✓ 有但无Edge AIYes, but no Edge AI ✗ 需外采External sourcing ✗ 需外采External sourcing
Edge AI(传感器端)Edge AI in device ✓ 自学习+自适应Self-Learn/Adapt △ 部分支持Partial ✗ ✗
工业LPWAN网络Industrial LPWAN ✓ ZETA自研ZETA In-house ✗ ✗ △ 依赖标准网络Relies on STD Net
Agentic AI诊断Agentic AI Diag ✓ 根因+RUL+建议Root Cause+RUL ✗ 固定阈值告警Fixed threshold ✓ 有算法Algo exists △ 通用不专精Generic
Day 1 可用Day 1 Ready ✓ 装上即学习Learn on install △ 基础告警可用Basic alerts ✗ 需3-6月数据Needs 3-6m data ✗ 需配置集成Needs integration
预测性维护专注度PdM Focus ✓ 核心业务Core Business △ 硬件为主Hardware main ✓ 有Yes △ 众多模块之一One of many app
传统运维Traditional O&M
突然坏了 → 被动救火Sudden Break → Firefight
当前方案Current IoT
传感器预警 → 人工判断Sensor Alert → Manual Diag
+ Agentic AI
AI诊断 → 人工确认执行AI Diagnosis → Human Confirms
ZiFiSense 预测性维护Predictive Maintenance × Agentic AI
从被动救火,到主动预防From Passive Firefighting to Active Prevention
让新手也能做专家级运维Empowering Rookies to deliver Expert-Level O&M
01

免费现场评估Free On-site Eval

工程师上门了解您的设备情况和运维痛点,提供定制化方案建议Engineers visit to understand your eq status & pain points, providing a custom solution prep.

02

小规模试点Small Scale Pilot

选取2-3台关键设备,4周看到AI诊断效果,数据说话Pick 2-3 key assets, see AI diagnostic results in 4 weeks. Data speaks.

03

全厂规模部署Factory-wide Rollout

基于试点结果快速扩展,模块化灵活配置,按需付费Scale up quickly based on pilot results, modular flexible config, pay-as-you-grow.

🌐www.zifisense.com
📧info@zifisense.com
📍ZiFiSense 纵行科技ZiFiSense
化工领域 | 水泵故障案例Chemical Industry | Water Pump Failure Case
Pump
传感器安装在设备间内回水泵Sensor installed on room return water pump
  • ZETA预测性维护方案在恶劣环境下是成本最优选择ZETA PdM solution is the most cost-effective choice in harsh environments.
  • Edge AI振动传感器在完成AI学习后立即发出警报信号。Edge AI vibration sensor issued alerts immediately after AI learning.
  • ZETA端智能振温传感器可确保对电机异常进行实时监测和检测。ZETA edge-intelligent vib & temp sensor ensures real-time motor anomaly detection.
ZETA端智能振温传感器在安装10天后检测出设备潜在故障 ZETA Edge-intelligent Vib & Temp Sensor detected potential failure 10 days after installation
2023.5.9
传感器安装到设备间回水泵,开始AI自学习Sensor installed on return water pump, AI self-learning started.
2023.5.16
AI自学习完成,传感器持续监测设备状态AI self-learning completed, continuous monitoring active.
2023.5.19
上报轴承故障告警,客户考虑刚安装选择忽略Sensor reports bearing failure. Customer ignores alert due to recent install.
2023.5.24
回水泵因轴承故障导致停机,证实预测准确Return water pump stops due to bearing failure, confirming accurate prediction.
Speed rms vs Acceleration rms
1.0 0.5 0
05/09 05/13 05/16 05/19 05/22 05/24
Speed rmsSpeed rms
Acceleration rmsAcceleration rms
Bearing failureBearing failure
AI学习期 = 7天AI Learning = 7 days
AI自
学习完成
AI Learning
Completed
触发告警
(轴承故障)
Alarm
(Bearing Failure)
距离崩溃提前 5 天5 days ahead before breakdown
热电厂 | 化学一期中间水泵故障预测Power Plant | Chem Phase 1 Pump Failure Prediction
2022.5.8
振动终端发出“轴承故障”报警至设施设备管理平台。 Vibration terminal issues "bearing fault" alarm to management platform.
2022.5.18
现场人员用手持设备检查认为运行正常,故障留档。 On-site manual check deemed running normal. Alarm archived.
2022.5.18-5.25
加速度值高速上升,设备进入快速劣化阶段。终端持续告警。 Acceleration spikes, rapid degradation phase. Continuous alarms.
2022.5.25
停机拆机确认轴承存在故障,更换备件避免非计划停机。 Shutdown confirms bearing fault. Quick replacing avoids un-planned halt.
*客户系统 维修工单*Client system repair WO
累计故障次数Cumulative Faults
580
累计报警次数Cumulative Alarms
855
时间Time
2022-5-5 04:48
2022-5-26 16:48
设备Device
部件Component
报警曲线Alarm Curves
报警
低频加速度rms报警0
振动速度rms报警0
温度突增超过高报警0
温度过高报警0
高频加速度rms报警0
(All)
低频加速度...
振动速度...
温度突增...
温度过高报警
高频加速度...
故障曲线Fault Curves
故障
润滑不良故障1
结构松动故障1
轴承故障1
齿轮故障1
齿轮箱轴承故障1
(All)
润滑不良故障
结构松动故障
轴承故障
齿轮故障
齿轮箱轴承...
模拟量曲线Analog Curves
加速度峰峰...
100500
加速度rms...
100500
速度rms...
100500
2022-5-5 00:00 2022-5-7 00:00 2022-5-9 00:00 2022-5-14 00:00 2022-5-19 00:00 2022-5-24 00:00 2022-5-27 00:00
模拟量Y P
(All)
位移峰峰值
低频rms
功率谱2xGMF
加速度rms(m/s2)
加速度峰峰值(m/s2)
峭度
幅值谱...
松动因子
歪度
润滑因子
温度(℃)
转速(r/min)
速度rms(m/s)
高频rms
场景案例 | 水泥行业Scenario Case | Cement Industry
中材邦业与纵行科技签订战略合作协议,双方将以ZETA低功耗物联网通信技术及端智能振温传感器为切入点,为水泥行业提供更加智能、更低成本的旋转设备的预测性维护方案,实现设备运行状态监测、早期故障的告警和诊断,帮助水泥企业快速实现数字化和设备智能运维,并大幅提升运维效率。 Sinoma Bangye and Zifisense signed a strategic cooperation agreement. Using ZETA low-power IoT tech and smart vibration/temperature sensors, the parties provide the cement industry with smarter, low-cost predictive maintenance for rotating equipment. This enables status monitoring, early fault alarms, and diagnostics, expediting digital transformation and greatly improving O&M efficiency.
用户痛点User Pain Points
  • 自动化、智能化水平较低使得企业制造成本居高不下;Low automation and intelligence keep manufacturing costs persistently high;
  • 生产高度流程化,流程中断会造成巨大生产损失;Highly pipelined production means interruptions cause massive losses;
  • 日趋严格的环保政策对企业的节能减排提出了更高的要求,水泥行业数字化转型愈发迫切。Strict environmental policies demand higher energy savings, making digital transformation urgent.
项目背景Project Background
本次合作启动后,槐坎南方水泥、广德独山南方水泥、合肥南方水泥将在工厂内搭建ZETA网络,以低成本的泛在物联实现全面的数据采集,并在厂内数量众多的B类及C类主辅机设备上安装ZETA系列端智能传感器,实现主辅机设备的状态监测和故障预警,降低人工巡检工作量,可降低30%的运维成本,并避免因设备故障导致的大规模经济损失。 Upon launch, Huaikan, Guangde Dushan, and Hefei Southern Cement plants will build ZETA networks for low-cost ubiquitous IoT data collection. ZETA smart sensors will be installed on numerous Class B & C equipment to enable status monitoring and early fault warning. This reduces manual inspections, cuts O&M costs by 30%, and prevents large-scale economic losses from sudden failures.
产品规格书Product Specification
振动分析终端选型表Vibration Terminal Selection Table
振温分析终端(基本款)Vib&Temp Terminal (Basic) 振温分析终端(升级款)Vib&Temp Terminal (Pro) 振温采样终端Vib&Temp Sampler
型号Model ZAIoT-VTD10 ZAIoT-VTD01 ZAIoT-VTC01
频响范围(3dB)Freq Response (3dB) 5-5k Hz 1-10k Hz 主轴Z 1-10k Hz
旁轴XY 1-6k Hz
Z-Axis: 1-10k Hz
X/Y-Axis: 1-6k Hz
采样频率Sampling Rate 12.8k Hz 25.6k Hz 主轴Z 25.6k Hz(默认,可配置)
旁轴XY 26.6k Hz
Z-Axis: 25.6k Hz (Def, Conf)
X/Y-Axis: 26.6k Hz
测量量程Measuring Range ±16g ±100g 主轴Z ±100g
旁轴XY ±16g
Z-Axis: ±100g
X/Y-Axis: ±16g
原始数据Raw Data 上报Reported 不上报Not Reported 上报Reported
结构Structure 一体式、分体式Integrated, Split
工作温度范围Working Temp 一体式 -30~80℃
分体式 -30~125℃
Integrated: -30~80℃
Split: -30~125℃
认证Certification IP67防护、Ex ia IIC T4 Ga防爆、CE安全IP67, Ex ia IIC T4 Ga, CE
安装方式Installation M6螺纹/胶粘/磁吸M6 Thread / Adhesive / Magnetic
电池寿命Battery Life ≥3年≥3 Years
分析能力Analysis Ability 有Yes 有Yes 无No